8" SUB MOUNT 14+ ( FRONT OR REAR)
Sold in pairs
Front Mount Adapter Rings 
Front CNC molded sub mount adapter , OD 8.625 mounting 7.125 Set back ½”  Slight variances of 1-3%. I took all the guess work out of it for you! These sit up front and allow either a midbass or a sub to be mounted. In them. These will also pair up with the rear set! 2 wasn’t enough and want to add 2 more. No worries! The 2 piece match up and it takes the guess work out of having to redo your saddle bags. Just add the rear and your sitting at quads!
Fitment will also vary by bag manufacture.  Using a Quality bag or stock bag will achieve the best results.
Rear Mount Adapter Rings 
Rear CNC  molded sub mount adapter , OD 8.625 mounting 7.125 Set back ½”  Slight variances of 1-3%. I took all the guess work out of it for you! These sit up front and allow either a midbass or a sub to be mounted. In them. These will also pair up with the front set! 2 wasn’t enough and want to add 2 more. No worries! The 2 piece match up and it takes the guess work out of having to redo your saddle bags. Just add the fronts and your sitting at quads!
Fitment will also vary by bag manufacture.  Using a Quality bag or stock bag will achieve the best results.
MUST BE PREDRILLED PRIOR TO USING SCREWS. DO NOT USE SELF TAPPING SCREWS

It is recommended but not necessary to use a 2 part epoxy to bond the adapter to the saddle bag. A good example would be 3M 08115. You should also have some knowledge of body work as you will be cutting the saddle bag. 
**due to many variations of saddle bags these were CNC using stock bags. Depending on the bag slight modifications may have to be done to the adapter. I.E sanding to the mounting face of the adapter or use of silicon caulk to fill in small gaps. Using a quality aftermarket or stock bag will achieve the easiest and best results.
Custom Made Parts, all sales are Final
Sold in pairs